Bomba dosificadora Seko PoolMatch pH 1,5 l/h
Bomba dosificadora Seko PoolMatch pH 1,5 l/h Bomba dosificadora Seko PoolMatch pH 1,5 l/h

Metering pump Seko PoolMatch pH 1.5 l/h with Modbus

ref: 05BDSPHPMSPA1S00 sku: SPHPMSPA1S00
  • Peristaltic pH Dosing Pump
  • Manufacturer: Seko
  • Code: SPHPMSPA1S00
  • Flow rate of 1,5 l/h at 1,5 bar
  • Proportional dosing mode to achieve the setpoint value
  • Allows communication with Modbus protocol
  • IP65 protection
  • Backlit display
  • Included:
    - pH electrode
    - probe holder
    - 2 collars
    - connection cable
    - buffer solutions
    - installation kit
€309.00
Free shipping
Free Shipping + info

Technical characteristics

PH peristaltic pump Seko PoolMatch with Modbus

A peristaltic pump is a type of hydraulic pump used to pump a variety of fluids. The fluid is contained within a flexible tube inside a circular pump casing. A rotor with a number of rollers, shoes or wipers attached to the outer circumference compresses the tube. As the rotor turns, the part of the tube under compression closes forcing the pumped fluid to move through the tube. In addition as the tube is re-opened flow is induced into the pump, this process is known as peristalsis.

The pH is the parameter that measures the acidity or alkalinity of water. Alkaline water is water with a pH higher than 7.6 and acidic water is water with a pH lower than 7.2, the recommended values being between 7.2 and 7.6. Higher or lower values can reduce the effectiveness of chemical treatments.

The salt chlorinator automatically and effectively disinfects the pool water without the need for chemicals.
Benefits of salt chlorination. Only salt is needed. Avoids irritation. No more chemicals. Reduced maintenance.
  • Flow rate 1,5 l/h at 1,5 bar
  • Manufacturer: Seko
  • Code: SPHPMSPA1S00
  • Proportional dosing mode to achieve the setpoint value
  • Allows communication with Modbus protocol
  • IP65 protection
  • Backlit display
  • Including:
    - pH electrode
    - probe holder
    - 2 collars
    - connection cable
    - buffer solutions
    - installation kit
  • Equipment warranty: 3 years
    Incorrect placement of the pH probe will invalidate the warranty. The probe is a consumable not covered by the warranty, so it will be up to the manufacturer to determine in each case whether or not the warranty is applicable.

Data Sheet

Pump type
Peristaltic
Allows level control
Yes
Pump control
Digital
Automatic control of
pH

Documents