Swimming pool coping model Maya
ref: 17REMAYA sku: Maya
- Pool border model MAYA
- Plate size: 33,33 x 16,66 cm.
- Multipurpose: suitable for walls and floor, indoors and outdoors
- Made only with flat glass and ceramic dye.
- The box contains 12 linear meters.
- Price per box.
- Delivery time from 7 to 10 days
Product under order to factory, NO returns or exchanges are allowed.
The color of the image is indicative, the tinting may vary from one batch to another.
€229.00
Free shipping
Technical characteristics
Technical characteristics Swimming pool border model Maya:
Each gresite plate is composed of gresite of dimension 2,3 x 2,3 cm. They are made only with flat glass and ceramic dye, so the physical and chemical characteristics of the product are the same as those of glass, offering extreme hygiene.
- Thickness: 4mm.
- Gasket: 2mm.
- Controlled decontamination.
- Multipurpose: suitable for walls and floors.
- Suitable for interior and exterior use.
- Recycled glass.
what does the valance packaging contain?
- Panel size: 33.33 x 16.66 cm
- Each box contains 12 meters.
Supply of the gresite
The HISBALIT border is supplied in plates of 33.33 x 16.66 cm, depending on the chosen format.
Glued paper:
The pieces are glued with kraft paper on the exposed side, therefore, they are not visible at the time of installation.
Preparation prior to the installation of the Maya Valance:
Surface preparation:
To achieve good adhesion to the substrate, it must be completely free of dust, grease, paint, efflorescence, laitance, plaster residue, or any other substance that may impair the adhesion of the mosaic. The ideal substrate is a fine render with water-repellent mortar. Both vertical surfaces and floors must be perfectly leveled and smoothed.
It is advisable to use a specific tile adhesive cement for zero absorption products, with mixed and deformable binders. We recommend cementitious adhesives that comply with EN 12004 and EN 12002 C2TES1 standards.
Grouting
We recommend a cementitious-based grout for fine joints, without aggregate, deformable, water-repellent and stain-resistant, complying with the UNE-EN 13888 CG2W standard. All adhesive manufacturers also have a range of colored grouts
Necessary material for the placement of the gresite:
- Toothed trowel with fine tooth of 3 mm.
- Sponge trowel.
- Rubber or wooden block.
- Sponge.
- Glass cleaner rubber
How to place the gresite in the swimming pool:
Data Sheet
- Source
- National