Replacement selector valve Coral 1" 1/2" nut

Main features of Replacement selector valve Coral Cylinder nut 1" 1/2

• Clock nut 1" 1/2
• Manufacturer: Coral
• Code: 23012058
• Valid for filters with 1" 1/2" selector valve:
  - Coral Alaska
  - Coral Neptune
  - Coral RPG
  - Coral Series 92
  - QP Azur
  - QP Beige
  - QP Blue
  - QP Cyclone
  - QP Grana
  - QP Red
  - QP Ruby
  - QP Volcano
  - Superpool TT

Benefits of using this replacement

The use of the selector valve Coral Crazy Nut 1" 1/2 guarantees optimal compatibility with various filter models, ensuring efficient and prolonged operation of your pool filtration system. In addition, being an original spare part of the manufacturer Coral, it ensures maximum quality and durability of the product.

How to change the selector valve Coral Crazy Nut 1" 1/2

Step by step:

To change the selector valve Coral Crazy nut 1" 1/2 follow these instructions:

1. Turn off the pool filtration system and make sure there is no pressure in the filter.
2. Disassemble the old selector valve by removing the 1" 1/2 nut that holds it in place.
3. Carefully remove the old valve and be sure to clean any debris from the filter connection.
4. Place the new selector valve Coral 1" 1/2 jam nut in the correct position, making sure that the seals are properly aligned to prevent leakage.
5. Screw on the new 1" 1/2 nut firmly, without applying too much force so as not to damage the threads.
6. Turn the filtration system back on and check for leaks. Adjust if necessary.

If you follow these steps, your new Coral selector valve will be ready to operate effectively.

Technical Specifications for Coral Selector Valve Replacement Crazy Nut 1" 1/2

• Diameter: 1" 1/2
• Material: High strength plastic
• Compatibility: Coral and QP specified filters
• Resistance to pool chemicals
• Manufactured by Coral, specialist in swimming pool equipment