HT-K Real Zaragoza stoneware shield

Preparation prior to the installation of HT-K gresite:

Surface preparation:

To achieve good adhesion to the substrate, it must be completely free of dust, grease, paint, efflorescence, grout, plaster residue, or any other substance that may impair the adhesion of the mosaic. The ideal substrate is a fine render with water-repellent mortar. Both vertical surfaces and floors must be perfectly leveled and smoothed.

We recommend a specific tile adhesive cement for zero absorption products, with mixed and deformable binders. We recommend cementitious adhesives that comply with EN 12004 and EN 12002 C2TES1 standards.

Grouting

We recommend a cementitious-based grout for fine joints, without aggregate, deformable, water-repellent and stain-resistant, complying with the UNE-EN 13888 CG2W standard. All adhesive manufacturers also have a range of colored grouts

Necessary material for the placement of the gresite:

• Toothed trowel with fine tooth of 3 mm.
• Sponge trowel.
• Rubber or wooden block.
• Sponge.
• Glass cleaner rubber